Chinese Heavy Truck Parts Wholesaler
HOWO · SITRAK · Shacman · FAW · Foton · Dongfeng

Find parts by truck system
Why buyers source from Jinan
Number checked, not guessed
One shipment, several systems
Stock you can ask about
Export paperwork handled
Recently added numbers
The parts index, in one place
Notes from the workshop
Engines we hold parts for
- Weichai WD615 / WP10 / WP12 / WP13 — 181 part numbers
- Cummins ISM / QSM11 / M11 / ISG / ISF — 415 part numbers
- Yuchai YC6 series — 1 part numbers
- Xichai CA6DL — 29 part numbers
Questions buyers ask before the first order
How quickly will I get a price?
Quotes go out within about 20 minutes during working hours — Mon–Sat, 08:30–18:00 Beijing time (GMT+8) — and within 6 hours outside them.
Chinese truck parts are the main line, so anything for HOWO, SITRAK, Shacman, FAW, Foton or Dongfeng is priced directly. For Scania, MAN, Mercedes-Benz and other imported trucks we quote the Chinese aftermarket equivalent where one exists. The only condition is information: with a part number, a VIN or a clear photo the price comes back in the same message; without it we have to ask first.
What do you need from me to quote?
Send whatever you have — most quotes start from one item and fill in later. The three groups below are what we work from.
1. Vehicle and identity
- VIN or chassis number — the single most useful item. It pulls the factory build sheet and the parts diagram for that exact truck.
- Brand, model and year — FAW J6, Dongfeng Tianlong, Sinotruk HOWO or SITRAK, Foton Auman, Scania, MAN, Mercedes-Benz.
- Engine model and plate photo — for engine parts, the engine type and the serial plate: Cummins, Weichai, Xichai, Yunnei, Sinotruk MAN.
2. The part itself
- OE or part number off the old part — the most reliable basis for a quote.
- Name and specification — brake chamber, clutch kit, alternator — plus the numbers that define it: size, power, voltage, tooth count.
- Photos, if there is no number: both faces of the old part, the nameplate, and where it sits on the truck.
3. Order and shipping
- Quantity — single piece or bulk; price breaks start at volume.
- Grade — genuine, branded aftermarket, or a lower-cost domestic alternative.
- Destination — port or address, so freight and duty can be calculated.
Can you check a number I am not sure about?
Yes. Send the number, the truck model and a photo of the old part; we come back with the number we would ship and the reason.
Where the number is doubtful, the VIN settles it — the build sheet shows what the truck left the plant with. If the part cannot be confirmed, that is what you will hear back, together with the closest alternatives we can price.
Do you sell single pieces?
Every line can be quoted as a single piece, and a kit can be broken up — you are not forced into a set to buy one part.
What we do recommend is the set for engine repair work, because wear on one item usually means the others are close behind. The groups we quote most often:
- Piston group — piston, rings, pin, circlips.
- Cylinder group — liner, wet or dry, with the sealing rings where the engine uses them.
- Bearings — main bearings, big-end bearings, thrust washers.
- Valve train — valves, guides, seats, collets.
- Pumps and ancillaries — oil pump, water pump, injectors, turbocharger.
What is the minimum order, and can I ship LCL?
Minimum order is judged on two axes, and both are flexible.
- Quantity or volume — the usual case. For bulky, light goods we may ask for a full cubic metre or a minimum number of cartons, so packing and freight stay sensible.
- Order value — on standard stock we do not police the quantity of each line; we set a floor on the order as a whole, for example US$1,000 or US$2,000 on a first order. You can mix as many models as you like inside that, each at its own minimum packing unit.
LCL is standard. If the order does not fill a 20GP or 40HQ, loose cargo is the cheaper route:
- Your forwarder — we pack for export, pallet and marks included, and deliver to your nominated CFS, or your forwarder collects from our warehouse in Jinan.
- Our forwarder — consolidation from Ningbo, Shanghai or Shenzhen, by sea or air, through to the destination port.
- Multi-supplier consolidation — if you are buying from several Chinese suppliers, we can move our goods to the consolidation warehouse and ship as one container.
How is the packing done?
Inside: oil paper, then one box per part with the part number printed on it, then export cartons. Outside: a pallet or a wooden case, depending on weight.
Every wooden pack — case, pallet or dunnage — is treated to ISPM 15 before it leaves, and case sizes are kept within standard container dimensions.
Can you print our shipping marks?
Yes. The main shipping mark is printed to your artwork and applied to the cartons. Each carton also carries a side label with product name, specification, gross and net weight, volume and part number.
Printing is clear, waterproof and fade-resistant. Fragile lines get shock, moisture and this-side-up marks.
Can you provide custom packaging?
Yes. We design the packaging and supply the goods packed to it: printed cartons, your logo or your part number laser-marked on the parts themselves, and outer cartons or cases printed to your artwork.
Send the idea or the file with the order. If anything is unclear we send a proof before packing, so what arrives is what you approved.






